BHRTG - LUXENE VINYL RESIN MINUTE STAIN
- MSDS: BHRTG
- Manufacturer: AUSTENAL DENTAL INC
- Product Name: LUXENE VINYL RESIN MINUTE STAIN
- National Stock Number: 6520-00F010092
Product Identification
Product ID:LUXENE VINYL RESIN MINUTE STAIN
MSDS Date:06/19/1987
FSC:6520
NIIN:00F010092
MSDS Number: BHRTG
Responsible Party
CHICAGO, IL 60632
Emergency Phone: (312) 735-0601
Info Phone: (800) 621-0176
Preparer: JOHN CRINION
Cage: EO702
Contractor
Telephone: (800) 621-0176
Cage: EO702
Ingredients
METHYL ETHYL KETONE (2-BUTANONE) (MEK) (SARA III)
CAS: 78-93-3
RTECS: EL6475000
Fraction By Weight: 70%
OSHA PEL 200 PPM/300 STEL
ACGIH TLV: 200 PPM/300STEL 9192
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: IRRITATION TO MUCOUS
MEMBRANES & UPPER RESPIRATORY TRACT, NAUSEA, DIZZINESS, HEADACHE,
GASTROINTESTINAL DISTURBANCES. EYES: CORNEAL INJURY. SKIN:
DERMATITIS & IRRITATION. EYES: SEVERE IRRI TATION.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:INHALATION: IRRITATING TO MUCOUS MEMBRANES,
UPPER RESPIRATORY TRACT, NAUSEA, DIZZINESS, HEADACHE,
GASTROINTESTINAL DISTURBANCES. EYES: CORNEAL INJURY. SKIN:
IRRITATION & DERMATITIS.
Medical Cond Aggravated by Exposure:DERMATITIS
First Aid
First Aid:EYES: FLUSH W/COPIOUS AMOUNTS OF WATER FOR AT LEAST 15
MINUTES WHILE REMOVING CONTAMINATED CLOTHING & SHOES. INHALATION:
REMOVE TO FRESH AIR & GIVE ARTIFICIAL RESPIRATION IF NECESSARY. IF
BREATHING IS DIFFICULT, GIVE OXYGEN. CALL PHYSICIAN.
Fire Fighting
Flash Point Method:SCC
Flash Point:250F
Lower Limits:1.8%
Upper Limits:11.5%
Extinguishing Media:WATER SPRAY, CO2, DRY CHEMICAL ALCOHOL OR POLYMER
FOAM
Fire Fighting Procedures:USE WATER SPRAY TO COOL CONTAINER. WEAR
SELF-CONTAINED BREATHING & PROTECTIVE CLOTHING TO PREVENT CONTACT
W/SKIN & EYES.
Unusual Fire/Explosion Hazard:FLAMMABLE LIQUID. VAPOR MAY TRAVEL
CONSIDERABLE DISTANCES TO SOURCE OF IGNITION & FLASH BACK.
Accidental Release
Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION. ABSORB SPILL
W/SAND VERMICULITE & PLACE IN A CLOSED CONTAINER FOR DISPOSAL.
VENTILATE AREA.
Handling
Handling and Storage Precautions:STORE IN COOL, DRY AREA AWAY FROM
HEAT, SPARKS & OPEN FLAME. KEEP TIGHTLY CLOSED.
Other Precautions:AVOID CONTACT W/EYES, SKIN, CLOTHING & BREATHING
VAPORS. LAUNDER CONTAMINATED CLOTHING BEFORE REUSE.
Exposure Controls
Respiratory Protection:NONE NECESSARY IF FUMES ARE MAINTAINED
Eye Protection:SAFETY GLASSES
Other Protective Equipment:NONE
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING. LAUNDER
CONTAMINATED CLOTHING BEFORE REUSE.
Supplemental Safety and Health
Chemical Properties
Boiling Pt:B.P. Text:80C
Vapor Pres:70
Vapor Density:>1
Spec Gravity:0.95
Evaporation Rate & Reference:(BU AC = 1): >1
Solubility in Water:SOLUBLE
Appearance and Odor:COLORED, TRANSPARENT LIQUID HAVING A SWEET & SHARP
ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
OXIDIZING AGENTS, BASES & STRONG REDUCING AGENTS
Stability Condition to Avoid:IGNITION SOURCES, SPARK, HEAT & OPEN FLAME
Hazardous Decomposition Products:CO, CO2
Disposal
Waste Disposal Methods:BURN IN CHEMICAL INCINERATOR WITH AN
AFTER-BURNER & SCRUBBER. EXERT EXTRA CARE IN IGNITING THIS HIGHLY
FLAMMABLE MATERIAL.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.